WiSA Stereo Hub HT (New Generation)

Beschreibung

Produce Pure Digital & Lossless Audio Without Conversions or Analog With the introduction of the new WiSA Stereo Hub HT, Platin Audio is breaking new ground when it comes to pure digital audio experiences. The foundation of the new version is a completely new design – with state-of-the-art technology inside. As the philosophy of the device is settled around a pure digital and lossless approach, there will be no additional conversions, or analog section in the signal path. Everything internally handled with the highest respect of the audio signals – and thus this device represents a new frontier in digital audio playback. Control all audio devices in a simple and convient way WiSA Stereo Hub HT is all you need to connect all your devices in a completely wireless music system. It controls your audio devices and connects them wirelessly to your home speakers. It supports wired devices like TV, turntable, CD, Blu-Ray, computer, or any device you prefer to listen to. For wireless streaming it has built-in Tidal Connect, Spotify Connect, Chromecast, Airplay 2 and Bluetooth. On top of that we've added an ethernet port to eliminate the risk of network stability issues, and an upgraded HDMI (ARC/eARC) interface that works across all TV’s with 2-channel PCM audio. Streamer for 2.0/2.1 wireless music system On this new WiSA Stereo Hub HT, there is a cable-carried subwoofer output – allowing connection of an existing non-WiSA HT subwoofer to the system and create a 2.1 speaker layout. The output is compensated to match the latency of the WiSA system in accordance with WiSA standards. Advanced DSP core with multiple functions Built-in DSP, operating at 64bits depth with support for automatic room EQ system – supporting iPhone built-in microphone for the correction. Freestyling with manual EQ is available, where only imagination is your limitation. Automatic room EQ system Supporting the use of iPhones built-in microphones to correct your speakers placement and room acoustic challenges. The system is also available for Andriod users, but only with the use of our Zen Microphone to capture the acoustic data. The entire procedure can be performed in less than a minute - and the results are incredible. Manual EQ system for DSP freestyle With this feature filters can be added freely to all channels independently - or they can be combined to share same EQ by drag-and-dropping the channels in the APP. Each channel can fit up to 16 filters and 3 presets can be stored for each channel. Flexible bass-management system Allowing the user to freely set the crossovers frequencies between the speakers and the subwoofer with 5Hz steps in dependently. Further, the subwoofer level can be adjusted from the APP - allowing incredible accurate system trim. Speaker and subwoofer distance calibration This feature allows for the system to perfectly time-align the speakers in your system - to optimize the system integration via the provided APP. Channel level trim Every channel level can be calibrated and trimmed in steps of 0.5dB - to balance out any unevenness of the system. Rechargeable 2-way RF remote We have developed a new remote specially for the WiSA Stereo Hub HT. It is a premium metal housing with a completely new design on the inside, and has built-in battery and USB-C charging. The result is a much smoother experience and no need to replace the batteries. 2-way remote, showing system status via LED's in handset. The information available is: volume level, chosen input, power status, mute status, battery status. Operating at 433MHz brand, it is very robust and can meet ranges of up to 50meters. Battery-depending on the use-up to 1 year per changing. USB-C inlet for charging. Can be charged with the supplied USB-C charger or other USB-C charger. Automatic input selection and power management The Stereo Hub HT supports automatic input selection – so any input with signal is played. Should more than one input have signal, it plays the input with the highest priority. The device can even wake up from any active source, regardless the previous playback. Platin Harmony APP WiSA Stereo Hub HT will connect with any WiSA HT certified speaker on the market - and when combined with our advanced Platin Harmony APP, you unlock a whole new world of features for this device. Once your Stereo Hub HT is connected to your home network, you can configure your 2.0 or 2.1 system freely using the Platin Harmony APP by following below steps from your listening position: Connect your WiSA HT speakers with the Stereo Hub. Configure each speaker’s channel setting by drag-and-drop in the APP. Set your crossover frequencies, speaker levels and distances to calibrate the system to your preference and performance. The APP also allows you to do streaming playback-control and album art showing. You can adjust volume and change the input of the device. It also allows you free access to the DSP-core of the Stereo Hub. Apple App StorePlatin Harmony on the Apple App Stor